- Your shopping cart is empty!
K+ Pressure Pond Filter 9600 with Blower
$99.00 back via Rewards Points
K+ Pressure Pond
Filter 9600 w/ Blower
The complete line of these efficient filters use K+ filter
media for dramatically improved biological filtration compared to using beads.
The easy to use blower is utilized only during the cleaning cycle.
Pond water is pumped into the filter from the pump through
the multi-splined laterals where the internal pipework directs the water to the
bottom of the unit. Most all other filters "smash or dissolve" the
solid waste from your pond and thus rises the nitrates and discolors the water.
Whereas with the K+ filters, the water flows upwards inside the K+ Pressure
Filter as dirt, debris and waste are trapped within the mass of K+ filter
media. The vast protected surface area provided by K+ Media not only settles the
waste in it’s bottom levels, it also provides a home for the beneficial bacteria,
along with filter feeders such as Vorticella and Rotifers delivering mechanical
and biological filtration.
The filter's pathway then flows optimally back into the numerous top lateral pipework, separate from the bottom laterals. This super-efficient means of filtration separates the K+ line from all others. This also allows for the use of much smaller pumps. The only reason other filter companies require huge flow-rates is to back wash. The K+ line comes with a means of eliminating huge hi-watt pumps with the easy to use Blower that come with all K+ filters.
The K+ Pressure filter is incredibly easy to clean, by
simply moving the handle on the multi-port valve into the corresponding
positions to perform a backwash and a rinse of the K+ media.
- Double the Filtration Access Ports
in these Filters
- Clearer Water / Less Nitrate
Buildup then Other Filters
- The Very Best Backwash Rejection
Rate in the Industry
- Super-Efficient Electric Backwash
Blower Included
- Flow-Through K+ Conical Filter
Media – Not Beads
- Requires Less Flow than
Inefficient High-Flow Filters
- Smaller Pumps Means Saving Huge
Energy Costs
- Built-In Support Stand- Not a
Ringed Skirt, Pre-Loaded Media Included
- Clear Viewing Port Viewing Area on
Top
- Detachable Backwash Blower
- Rated at 21.8 lb pressure (tested at 36.26 lbs!)
- 24" Diameter, 2" Port Size
- Max Pond Size 9600 Gallons
If you are not planning to use a pre-filter or a recommended
skimmer box, then we highly recommend that you fit a strainer basket to the
pump.
This will prevent leaves, string algae etc. from entering
the filter and pump. It is recommended that all pipework on the pump side (from
the pump to the filter and back to the pond) is installed on 2” pipe. Please
note on the K+Pressure Filter you will have to reduce your pipe down to 1½” to
connect to the multi-port valve. This will ensure that your pump is working at
its maximum flow.
Do not operate the multi-port valve with the circulating
pump switched on. The ball valve must be closed when the circulating pump is
running.