Netune Systems ATK Auto Top Off Kit

The new Neptune ATK Auto – Top – Off - Kit is a highly anticipated addition to the super-quality Neptune line, and those of you that have not “ponied-up" for the Apex yet, good news,  you do not need an Apex controller to utilize it!

Apex owners get even more value-If you already have an Apex of ANY kind, setting up the ATK is still super-simple. Just plug in all the components, attach it to your Apex via the AquaBus cable, and then run the set up task inside Apex Fusion. With the ATK connected to an Apex, you get the added benefit of having email/text/iOS alerts if there is an emergency and you can integrate its operation into other functions. IQ-Fill (standalone mode only)-IQ-Fill is an intelligent and learning algorithm that, ongoing, monitors and records how much water your aquarium needs for each fill, and then calculates a maximum time your pump should run. By doing this, it dramatically reduces the chance that your pump would continue to add large volumes of water to the tank before you could realize it and fix the situation.                                                                                                                                        

PMUP – the most powerful pump provided with any ATO!-The PMUP is a 24V utility pump that is perfect for moving water from your RODI reservoir to the aquarium. This pump has a vertical design that easily drops into most water jugs or ATO reservoirs. The best part about the PMUP is that it has the the power to deliver water to your tank even from remotely located water reservoirs. Most other pumps that come with an ATO will barely pump six feet, the PMUP though has the ability to pump over 14’ vertically so it can even pump water up from a lower-floor or basement water storage location! Only use port-1 and port-2. This means there are two free ports that can be used for these optional purposes:

Optical Sensors with Magnetic Mounts- Whether for your ATO reservoir, to use as a sump-high alert, or for your long term water storage such as a brute container, these optical sensors will plugin into the FMM.  In standalone use when used in your ATO reservoir (plugged into port-4), the FMM will stop your PMUP and sound an alarm when the sensor is above the water level. If you plug it into port-3, and mount it high in your sump, if your water level ever goes that high, an alarm will sound and your PMUP will stop operating.

Comes complete with the following:

FMM – Fluid Monitoring Module (runs standalone)
Pre-assembled Water Leveling  Mechanism with Magnetic Acrylic Mount (works up to 1/4″ glass/acrylic)
Two (2) Optical Water Level Sensors, Compact Float Valve
PMUP ATO Powerful Pump
Comes complete with the following:
FMM – Fluid Monitoring Module (runs standalone)
Pre-assembled Water Leveling  Mechanism with Magnetic Acrylic Mount (works up to 1/4″ glass/acrylic)
Two (2) Optical Water Level Sensors,Compact Float Valve
PMUP ATO Powerful Pump
24V 36W Power Supply at 90 degree tubing fitting
4 meters of orange Neptune RO Tubing
3/8″ -> 1/4″ Push-fit Adapter Fitting
1/4″ -> 1/4″ Push-fit Siphon Break
Set-Screw for Non-Float-Valve Applications

Specifications:
Pump Dimensions - 2.25" OD x 5.5" H
Module Dimensions - 4.75" L x 2.75" W x 1.375" Ht.
Mounting Bracket Dimensions - 6.5" L x 3" x 3.5" (loaded with sensors and float valve)
Maximum Flow - 100gph
Maximum Head Height - 14'. Tubing OD - 1/4"
Maximum Tank Thickness - 1/2" (use with either Acrylic or Glass)
Power Consumption – Only 17W