- Your shopping cart is empty!
Platinum DC Blue 2100 Return Pump
Availability: In Stock
$12.00 back via Rewards Points
The Platinum DC Blue 2100 Return Pump
The Platinum Blue 2100 Variable Frequency pump is a
controllable pump with sine wave technology that is super quiet! It packs a big
punch with its high performance in a compact size. The 6-Pole DC Motor allows
for variable speed, quiet operation, and better control; its thickened and
insulated ABS shell further reduces noise. The high quality copper core equips
the pump with a powerful flow and head pressure. Full controllability with
built-in LED Fault Indicator allows you to facilitate troubleshooting. The
Platinum DC Blue series pumps are low voltage and ultra-energy efficient
drawing 1/3 of the electricity compared to regular pumps.
Features:
- Super Quiet
<20dB
- For External
or Submersible Use
- Durable
Corrosion Resistant Pump
- For
Saltwater and Freshwater
- Sine Wave
Technology
- DC voltage
- 5-year
warranty
- Adjustable
High Flow Rates-2113 gph, 16.4 ft Head Pressure
- Super Compact Size
The Platinum Blue Variable Frequency pump is a controllable
pump with sine-wave technology that is super quiet! It packs a big punch with
its high performance in a compact size. The 6-Pole DC Motor allows for variable
speed, quiet operation, and better control; its thickened and insulated ABS
shell further reduces noise. The high quality copper core equips the pump with
a powerful flow and head pressure. Full controllability with built-in LED Fault
Indicator allows you to facilitate troubleshooting. The Platinum DC Blue series
pumps are low voltage and ultra-energy efficient drawing 1/3 of the electricity
compared to regular pumps. Modes:
Steady Flow Rate Mode (20 Levels) – The pump will work in
mode 1 when powered on. You can change the speed by pushing the “speed” key.
When the indicator screen shows the number “101,” that means you have chosen
the lowest flow at mode 1. When the indicator screen shows the number “120,”
that means maximum flow rate is at mode 1.
Wave-Making Mode (20 Levels) – Before using wave-making mode
(mode 2), you should lower the speed level. For a normal fish tank, the
suitable speed is 02 and the indicator screen will show “102.” To change into
wave-making mode, press “Mode,” and the indicator screen will show “202” (that
means level 2 at mode 2), then press “speed” to change the wavelength.
Feed Mode – Press “Feed” until the indicator screen shows
the number “410.” The pump will then stop working during your fish feeding
time. Meanwhile, the indicator screen starts the countdown with it shows the
number “49.” The countdown is 10 minutes. When the screen shows the number
“40,” that means the countdown is over and the pump will start.
- Flow rate: 2113 gph
- Head
pressure: 16.4 ft
- Min Power
Consumption: 20 Watts
- Max Power
Consumption: 85 Watts
- Voltage: DC
24V
- Dimensions: 6.5″ x 3.3″ x 6.3″
- Inlet: 1″
- Outlet: 1-1/4″
1. Please
clean the wave pump regularly to ensure its effectiveness.
2. If there
is water on the surface of the controller, please wipe with dry cloth to
prevent water from getting into the controller.
3. If the
pump stops working, first check the power adapter, then removed the foot of
pump, open the pump lid by counterclockwise rotation, then clean the inner side
of the pump.
4. This
product is used indoor, don’t let the controller and adapter fall into the
water.
Notice:
1. Running
the pump dry will diminish its ability to perform at its highest level.
2. Keep the
controller and adapter away from the water.
3. To avoid
damage, please don’t open the controller and adapter.
Warrantied and Serviced by SevenPorts LLC